SCANGAUGE 2 OBD2 Tool

Description

 

Digital Gauges

ScanGaugeII provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 4 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.

Digital Gauge	Name
AVG	Average Fuel Economy
CLSD LP OPEN LP	Fuel System Loop Status
CPM	Cost Per Mile
FIA CIA	Intake Air Temperature
FPR	Fuel Pressure
FWT CWT	Water Temperature
GPH LPH	Gallons Per Hour Litres Per Hour
MAP BST	Manifold Absolute Pressure Boost
MPG KPG MPL LHK KPL	Miles Per Gallon Kilometers Per Gallon Miles Per Litres Liters Per 100Km Kilometeres Per Liter
MPH KPH	Miles Per Hour Kilometers Per Hour
RPM	Revolutions Per Minute
TFC	Trip Fuel Cost
TPS	Throttle Position Sensor
VLT	Battery Voltage
IGN	Ignition Timing
LOD	Engine Loading
HPR	Horsepower

 

Automatic Trip Computers

With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.

Time & Distance Trip Computers	Fuel & Tank Trip Computers
ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:	The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.
KM/L MPG	MPG / KML for current tank
Fuel Used	Fuel Used on current tank
Max Coolant Temperature	Tank to Empty
KMs Driven	Distance Driven
Max RPM	Distance Until Empty
Hours Driven	Hours driven on current tank
Max KPH	Hours to Empty
Average KPH	Average Speed
Fuel Cost	Fuel Used Cost

Performance Monitor

The ScanGaugeII features the all-new Performance Monitor™ for real-time performance measurements. The Performance Monitor gives you the ability to track your vehicle’s performance over short periods of time, distance and acceleration.

Monitor various aspects of your vehicle’s performance such as:
Track your quarter-mile times and speeds at the track.
Determine your vehicle’s 0-60 time.
Measure your vehicle’s braking performance.
Save and Recall performance runs.
Monitor specific Digital Gauges.
and much more…

Turn off That Check Engine Light!

The ScanGaugeII can check for Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.

Reads Trouble Codes
Clears Trouble Codes
Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
Turns Off “CHECK ENGINE” Lamp
Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing

Easy To Use & Install

Easy to Install No Tools Required
Installs in just minutes without tools. Simply plug the ScanGauge into the diagnostic connection under the dash.
No Batteries Required
The single connection to the diagnostic connector under the dashboard is all that is needed.
Automatic Protocol Determination
ScanGauge automatically determines the protocol your vehicle uses and connects.
6-Foot Cord and Velcro® Attachment
The ScanGauge can be mounted up to 6 feet from the under-dash diagnostic connector. The included Velcro® attachment system allows the ScanGauge to be quickly detached and then used to troubleshoot other vehicles.
User-Friendly Menu-Driven Operation
Simple 5-button operation allows you to quickly and easily access the powerful features of the ScanGauge.
Colour Backlight Display
Match your instrument panel for an integrated look.
English & Metric Units
The Digital Gauges and Trip Computer information can be shown in either English or Metric units of measure, including KM’s, Litres, Celsius, and kPA.

Great Features
Automatic Power Control
Automatic delayed power-down after engine shutoff
Automatic power-up when engine is started
Manual power-up with delayed power-down via HOME key
User Settable Backlight
Display Colour, 7 Standard screen colours and a custom setting with 63 possible colours.
Backlight for night use
User settable Off, Low and High

Easy To Operate
Simple on-screen operation
4 menu driven soft keys
User settable update rate (Slow, Normal and Fast)
A HOME key to quickly return to the start screen
Non-Volatile Memory
(stored information is not lost when disconnected)

User settings automatically saved
Up to 10 user commands can be stored and recalled
Today, Yesterday and Tank Trip data automatically saved
Vehicle settings automatically saved